联系我们 | 繁體中文 | English
 
 
   科研仪器目录
   2B Technologies
   C.B.S. Scientific
   Cellix
   Glas-Col
   Kinematica AG
   Q.Instruments
   SBP
   Wale Apparatus
   特种试剂目录
   1-Material
   AK Scientific
   Alamanda Polymers
   American Dye Source
   Carbodeon
   Chematech-mdt
   DYESOL
   EpiValence
   Hybrid Plastics
   Laysan Bio
   Lumiprobe
   Mayaterials
   Ocean NanoTech
   Polymer Source
   Rieke Metals
   Scientific Polymer
   Solaris Chem
   实验耗材目录
   Diversified Biotech
   GRAFOIL GTS
       产品展示
 2B Technologies >> 臭氧检测仪 >> 美国2B Technologies公司Model 211 Scrubberless Ozone Monitor™
 
  
产品编号:
399405516
产品名称:
美国2B Technologies公司Model 211 Scrubberless Ozone Monitor™
产品品牌:
2B Technologies
产品备注:
Model 211
产品类别:
2B Technologies
 
       产 品 说 明

美国2B Technologies代理,美国2B Technologies销售。

Model 211 Scrubberless Ozone Monitor™

The World's Most Accurate Ozone Monitor
EPA Federal Equivalent Method (FEM)

The new Model 211 Scrubberless Ozone Monitor uses the proven ultraviolet (UV) absorption method in combination with our patented (US Patent No. 8,395,776 B2) gas-phase scrubber technology to measure ozone virtually free of interferences. The instrument is ideally suited for measurements of ozone in heavily polluted air where interference is likely from particulates, mercury, or VOCs. The Model 211 combines the stability of our proven dual beam ozone monitors with our selective scrubber technology to provide accurate ozone measurements in the most polluted air. The enhanced optical path length of 30 cm provides a precision of better than 0.5 ppb for 10-second measurements, and the instrument can output new ozone measurements as often as every 2 seconds. The Model 211 Scrubberless Ozone Monitor has been designated by the EPA as a Federal Equivalent Method (FEM): EQOA–0514–215


 

Theory

Ozone monitors based on UV absorbance measure ozone by comparing the transmission of light through a detection cell. Light intensity measurements are made with ozone present (I) and with ozone removed (Io), and the ozone concentration is calculated using the Beer-Lambert Law. Conventional ozone monitors remove ozone for the Imeasurement by passing the sample air flow through a solid scrubber (e.g., hopcalite or a series of metal oxide screens). Ideally, the solid-phase scrubber would destroy ozone but pass mercury and other UV-absorbing compounds. In that case, the values of I and Io would be reduced by the same amount, and the interfering compounds would not affect the ozone measurement. In practice, however, mercury and aromatic compounds such as benzene, toluene, xylenes, phenols, etc. either adsorb or react at the solid-phase scrubber surface. As a result, conventional ozone monitors may report erroneously high ozone values by up to a few ppb on highly polluted days and possibly cause a region to be out of compliance with the EPA's ozone standard. The 2B Tech Model 211 Ozone Monitor removes interferences from all UV-absorbing compounds and mercury by using nitric oxide (NO) in a GPT (gas phase titration) reaction in place of a solid-phase scrubber according to the well known reaction:   NO + O3 → NO2 + O2

Picture

The animation above illustrates the principle of a gas-phase NO scrubber for a single-beam instrument. A small amount (~5 ppm) of nitric oxide (NO; blue) is pulsed into the air flow every 2 seconds to destroy the ozone and produce nitrogen dioxide (NO2; green) which doesn't absorb the UV light. When ozone (red) is present the signal at the photodiode is reduced due to ozone absorbing the UV light. When ozone is destroyed by the NO, the signal increases. The difference in measured light intensities is proportional to the ozone concentration. Because the potentially interfering species (benzene, toluene, xylenes, aldehydes, mercury, etc.; colored yellow) are always present and not modulated by NO, they do not contribute to the signal difference and thus do not interfere with the ozone measurement.

Like our Model 205 Ozone Monitor, the Model 211 is actually dual beam, with a measurement of the transmission of UV light through ozone-depleted air being made simultaneously with a measurement of UV light passing through unscrubbed air, thus increasing the precision and baseline stability of the instrument.

Nitric oxide can be added directly from a compressed gas cylinder or by photolysis of nitrous oxide (N2O) provided from a N2O cartridge (8 hr of operation for portable applications), half-sized cylinder (8 mo of operation) or full-sized cylinder (2 yr operation). The use of N2O as a source gas eliminates the need for maintaining cylinders of toxic NO gas. Nitrous oxide is a relatively non toxic gas sold as a consumer product as "Whippit" cartridges for making whipped cream. The same method for producing NO from N2O is used in our Model 408 Nitric Oxide Calibration Source.

The Model 211 allows remote instrument operation via RS-232, choice of averaging time (2 s to 1 hr), analog voltage output (0-2.5 V), optional analog current output (4-20 mA), and internal data logger. Our data display and graphing software allows continuous display of data which can be saved for offline analysis

Features

  • Interference-free measurement of ambient ozone
  • DewLine™ for elimination of water vapor interference, a unique feature of 2B Tech instruments
  • Inexpensive, simple, and robust instrument design in a 19” rack mount enclosure
  • Internal data logger
  • Dual beam, long path (30 cm) optical bench with high precision (< 0.5 ppb)
  • NIST-traceable calibration (calibration suggested annually)
  • Internal long-life sample pump (20,000 hours)
  • EPA Federal Equivalent Method (FEM) for compliance monitoring (EQOA–0514–215)
  • Candidate to become a new EPA Federal Reference Method (FRM)
  • Convenient user interface, including remote operation via RS-232 communication
  • Internal NO generator from non-toxic, non-corrosive nitrous oxide (N2O)
  • Very low NO concentration used in comparison to ozone monitors based on NO chemiluminescence

Options

  • Battery
  • External particle filter
  • Lamp heater for outdoor operation in extreme environments
  • Bluetooth wireless data transmission
  • Flash memory for virtually unlimited portable data storage
  • 4-20 mA analog current output
  • External serial-to-USB adapter
  • High-altitude upgrade allows operation up to 25 km (pressure sensor)

Recent Publications and Presentations Evaluating the Model 211

  • T. Johnson, J. Capel and W. Ollison (2014) Journal of the Air and Waste Management Association 64, 360-371, "Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and interference-free 2B Technologies 211 monitor."
  • Russell Long (2015) "Evaluation and Proposal of a New Federal Reference Method for Ozone: Nitric Oxide Chemiluminescence," Briefing for NACAA, Office of Research and Development, National Exposure Research Laboratory, Environmental Protection Agency, January 14, 2015.

Specifications

Measurement Principle UV Absorbance at 254 nm; Dual Beam
Federal Equivalent Method (FEM) Yes, EQOA–0514–215
Linear Dynamic Range 0-2,000 ppb (0-2 ppm)
Resolution 0.1 ppb
Precision (1σ rms noise) Greater of 0.5 ppb or 1% of reading for 10-s average
Accuracy Greater of 1.0 ppb or 2% of reading
Limit of Detection (2σ) 1.0 ppb
NIST-Traceable Calibration Yes
Flow Rate (nominal) ~2 Liter/min
Flow Rate Requirement >1.2 L/min
Baseline Drift < 1 ppb/day
< 3 ppb/year
Sensitivity Drift < 0.5%/day
< 3%/year
Response Time, 100% of Step Change 20 s for 10-s averaging; 4 s for 2-s measurement
Measurement and Averaging Times 2 s, 10 s, 1 min, 5 min, 1 hr
Internal Data Logger Capacity 16,383 lines (10-s avg. = 1.9 days; 1-min avg = 11 days; 5-min avg = 1.9 mo;
1-hr avg = 1.9 yr)
Ozone Units ppb, ppm, pphm, µg m-3, mg m-3
Pressure Units mbar, torr
Temperature Units °C, K
T and P Corrected Yes
Operating Temperature Range 10 to 50 °C
Operating Altitude Range ~0-13.5 km (150-1,013 mbar) standard; optional ~0-25 km (30-1,013 mbar) with upgraded pressure sensor
Power Requirement;
Supplied by Battery or 110/220 VAC Power Pack
11-14 V dc or 120/240 V ac, 0.75 A at 12 V, 9 watt
Size Rackmount: 17" w x 14.5" d x 5.5" h (43 x 37 x 14 cm)
Weight 14.3 lb (6.5 kg)
Data Outputs RS232, 0-2.5 V Analog, optional 4-20 mA Analog, optional USB adapter
Data Transfer Baud Rates 2400, 4800, 19200
Output Ranges User-Defined Scaling Factor in Menu
DewLine™ Yes
Long-Life Pump Yes, 20,000 hr
Flow Meter Yes
Options Battery; External Particle Filter; Bluetooth; Flash Memory; External Serial-to-USB Adapter; 4-20 mA Current Output; Lamp Heater; High-Altitude Upgrade (pressure sensor)

System Includes

  • Model 211 Scrubberless Ozone Monitor
  • AC Power Adapter (100-240 VAC to 12 VDC) with Country-Specific Plug
  • Zeroing Cartridge
  • Portable N2O Source
  • Operation Manual on USB Stick
  • Calibration Data and NIST-Traceable Calibration Certificate
  • Instrument Birth Certificate
  • One-Year Warranty
To download a brochure describing the Model 211 Ozone Monitor™ (PDF format), click on the download button below.
点击数:3308   【打印此页】 【关闭】    
      代理品牌推荐
 Cellix   Glas-Col   C.B.S. Scientific   DivBio   Polymer Source   Rieke Metals   Ocean Nanotech 
     
  关于巴溪 |  联系巴溪 |  企业邮局 |  湘ICP备17002618号  
  Copyright © 2007-2019 All Rights Reserved 巴溪仪器版权所有  
  湘公网安备43010202000963号